THE EFFECT OF USING ALUMINIUM FOAM IN STEEL SANDWICH TARGETS AGAINST BLUNT PROJECTILES
Abstract
In this paper, the effect of using Aluminium Foam (Alporas) on the ballistic resistance of multi layered target comprising two steel layers and Al foam in between against rigid projectile of blunt nose impact at sub-ordnance velocities (320 : 400 m/s) is evaluated using finite element analysis using ABAQUS/explicit. Rigid projectile of blunt nose is considered, it is manufactured from Arne tool steel with a nominal mass and diameter of 197 g and 20 mm. The evaluation has been done by comparing the ballistic resistance of a single layer of steel plate to eleven different composite plate structure comprising two layers of steel plates and Aluminium foam layer sandwiched between them. The study reveals that using Aluminium foam absorbs more kinetic energy from the projectile during penetration and, hence, reduces the residual velocity of the projectile. Also it is found that the total mass of each structure is less than the total mass of single layer target.
References
[2] Mines, R.A.W., C.M. Worrall, and A.G. Gibson, LOW VELOCITY PERFORATION BEHAVIOUR OF POLYMER COMPOSITE SANDWICH PANELS. International Journal of Impact Engineering, 1998. 21(10): p. 855-879.
[3] Shyr, T.-W. and Y.-H. Pan, Low velocity impact responses of hollow core sandwich laminate and interply hybrid laminate. Composite Structures, 2004. 64(2): p. 189-198.
[4] Borvik, T., et al., Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles--experimental study. International Journal of Impact Engineering, 2004. 30(4): p. 367-384.
[5] Corbett, G.G., S.R. Reid, and W. Johnson, Impact loading of plates and shells by free-flying projectiles: A review. International Journal of Impact Engineering, 1996. 18(2): p. 141-230.
[6] Backman, M.E. and W. Goldsmith, The mechanics of penetration of projectiles into targets. International Journal of Engineering Science, 1978. 16(1): p. 1-99.
[7] Goldsmith, W., et al., Perforation of cellular sandwich plates. International Journal of Impact Engineering, 1997. 19(5-6): p. 361-379.
[8] Roach, A.M., K.E. Evans, and N. Jones, The penetration energy of sandwich panel elements under static and dynamic loading. Part I. Composite Structures, 1998. 42(2): p. 119-134.
[9] Li, Y., J.B. Li, and R. Zhang, Energy-absorption performance of porous materials in sandwich composites under hypervelocity impact loading. Composite Structures, 2004. 64(1): p. 71-78.
[10] Hibbitt, H., B. Karlsson , and S. P., Abaqus User’s manual, ABAQUS/EXPLICIT 6.6. 2006.
[11] Borvik, T., et al., Ballistic penetration of steel plates. International Journal of Impact Engineering, 1999. 22(9-10): p. 855-886.
[12] Johnson, G.R. and W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fracture Mechanics, 1985. 21(1): p. 31- 48.
[13] Camacho, G.T. and M. Ortiz, Adaptive Lagrangian modelling of ballistic penetration of metallic targets. Computer Methods in Applied Mechanics and Engineering, 1997. 142(3-4): p. 269-301.
[14] Borvik, T., et al., A computational model of viscoplasticity and ductile damage for impact and penetration. European Journal of Mechanics - A/Solids, 2001. 20(5): p. 685-712.
[15] Borvik, T., et al., Numerical simulation of plugging failure in ballistic penetration. International Journal of Solids and Structures, 2001. 38(34-35): p. 6241-6264.
[16] Gupta, N.K., M.A. Iqbal, and G.S. Sekhon, Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles. International Journal of Impact Engineering, 2006. 32(12): p. 1921-1944.
